Fluorodyn Caulk made with Viton

THERMODYN CORPORATION introduces the ideal solution for splicing fluroelastomer parts and for use as a coating to prevent corrosion in virtually all environments. This revolutionary caulk, based on Viton fluoroelastomer and produced in conjunction with DuPont Dow Elastomers, provides excellent sealing for flanges or lining in pipe.
Fluorodyn Caulk made with Viton is compounded with 75% solids making it an easy to apply, single component caulk. This advanced compound system provides excellent corrosion resistance in the uncured state, as well as increased resistance after curing, to virtually all chemicals, including nitric, sulfuric and hydrochloric acids. Fluorodyn Caulk made with Viton is recommended for use in harsh, corrosive environments that require flexibility, leak-proof sealing, and high resistance to permeation.

Fluorodyn Caulk is available only from Thermodyn in the following sizes: 2.5 oz. (71 ml) tube, pint (320 ml), quart (850 ml) caulking tubes with resealable applicator, gallon (3.8 L), 5 gallon (19 L), and economical 55 gallon (208 L) drum.

Packaging 1 gal drum
2.5 oz. (71 ml) tube
5 gal drum
55 gal drum
Product Features
  • Easy to use
  • Factory loaded re-sealable cartridges, convenient 2.5 oz. (71 ml) tube, 1 gal, 5 gal, 55 gal drum
  • 75% solids by weight
  • Low permeability & no porosity
  • Temperature good to 450F (244C)
  • 1655 psi tensile strength
  • 285% elongation
  • Various colors (white, brown)
Benefits
  • No mixing, no mess
  • Indefinite product life eliminates expensive Viton waste
  • Caulk will not break down in harsh conditions
  • Assures corrosion protection
  • Exceeds most high temperature caulks
  • Great bonding properties
  • Very flexible
Targeted Applications
  • Chemical resistance
  • Corrosion resistance
  • Aliphatic, aromatic, and halogenated hydrocarbon resistance
  • Flue duct expansion joint repair
  • Viton repair
  • Resistant to ozone and UV light
  • Protects mental
  • Seals concrete
  • Environmental protection
  • Adheres to all metals, concrete, glass and ceramics
  • High temperature
  • Sealing flanges
Solids Content by Weight Fluorodyn Caulk made with Viton – 75%
Old standard two part systems – 65 % to 70%
Tensile Strength Fluorodyn Caulk made with Viton – 1655 psi
Old standard two part systems – 1200 psi
Ultimate Elongation Fluorodyn Caulk made with Viton – 285%
Old standard two part systems – 125%
Service Temperature (Exceeds) 450F
244C
Concentrated Sulfuric Acid Fluorodyn Caulk made with Viton – +6%
Old standard two part systems – +12%
Concentrated Nitric Acid Fluorodyn Caulk made with Viton – +8%
Old standard two part systems – +15%
Concentrated Hydrochloric Acid Fluorodyn Caulk made with Viton – +3%
Old standard two part systems – +5%
Concrete Adhesion Fluorodyn Caulk made with Viton – 360 psi
Old standard two part systems – 140 psi
Pot Life @ 75F (22C) Fluorodyn Caulk made with Viton – Indefinite
Old standard two part systems – 4 hours
Required Mixing Fluorodyn Caulk made with Viton – No
Old standard two part systems – Yes
Application Methods Fluorodyn Caulk made with Viton – Trowel or Factory loaded cartridge
Old standard two part systems – Trowel or Customer loaded cartridge

Request More Information