|Pot Life at 70 F||60 min.|
|Visual Appearance||Clear Gloss|
|Solids by Weight||100 percentage|
|pH Range||3.0 – 13.0|
|Max. Dry Operating Temperature||250 F|
|Functional Cure||48 hours|
|Full Cure||120 hours|
|Surface Prep||SPC-1, 3, 7|
|Equipment||Brush, Roller, Trowel, Airless Spray|
|Number of Coats||1|
|Theoretical Coverage Per Gallon||320 ft2/gal. at 5 mils|
|Film Thickness Per Coat||As Required|
|Recoat Time at 70 F||6 hours min.|
72 hours max.
|Min. Application Temperature||35 F|
|Mixing Ratio by Weight||6:5 (B/A)|
|Mixing Ratio by Volume||1:1 (B/A)|
|Dry to Touch||8 hours|
|Force Curing||Contact DUROMAR for specific instructions.|
|Storage||This product has a minimum shelf life of one year when stored in a dry area at 50 F – 100 F in the original sealed container.|
|Handling and Safety|
|Warning Eye and skin irritant. May cause dermatitis and sensitization.|
Always read and understand the product MSDS.
Avoid contact with eyes, skin or clothing. Avoid breathing vapor, mist or spray. Use with good ventilation.
|In case of contact:|
Eyes: Immediately flush with water for at least 15 minutes.
Skin: Immediately remove from skin with dry cloth followed by thorough washing with soap and water.
Inhalation: Remove to fresh air. If breathing is difficult, give oxygen.
Ingestion: Give large quantity of milk or water, induce vomiting. Contact a physician immediately.
Duromar DF-1302 Concrete Sealer
DF-1302 is a clear, 100% solids industrial concrete sealer with excellent flexibility and moderate chemical resistance. It is used primarily to seal the concrete prior to the application of additional topcoats and to restore the mechanical properties of old concrete. It can be cured at temperatures as low as 40 F and can be applied to damp concrete.
Multifunctional epoxy with a uniquely modified cycloaliphatic amine hardener.
We have other products and systems of which we can Engineer to fit your application. Give us a call at 801-977-0508!