Bowers Industrial

ROOFMATE The Roof Preservation System

Industrial Reactor Protected by PC-517 Poly-Chemcure Glass Filled Epoxy Mastic Coating
Industrial water treatment plant with PC-517 Poly-Chemcure Glass Filled Epoxy Mastic Coating
Large industrial storage tank getting coated with PC-517 Glass Filled Epoxy Mastic Coating

ROOFMATE The Roof Preservation System

Meets ASTM D6083; ENERGY STAR & CRRC Listed ROOF MATE is a water-based, high solids elastomeric coating utilizing the latest advances in acrylic technology. Highest quality 100% acrylic resins are combined with reinforcing laminar pigments, an effective biocide package and non-migrating fire retardants, resulting in superior durability, weatherproofing, ultraviolet resistance, algae/mildew resistance and fire retardancy. ROOF MATE is a highly reflective, permanently flexible “breathing” membrane, allowing moisture vapor from the substrate or building interior to escape while remaining impervious to mass water penetration from the exterior. ROOF MATE is also available in a high-tensile strength version for roof areas subject to heavy maintenance traffic, severe weather conditions, chemical fallout, etc., as well as a quick set version for use on applications where a more rapid resistance to moisture is necessary. Colors ROOF MATE is stocked in White, Light Gray or Medium Gray. An unlimited selection of custom colors are also available for specific applications. Color chips must be furnished to UNITED for all custom colors. ROOF MATE QS (Quick Set) is available for marginal conditions when a faster set time is desired with white or light colored topcoats. We have other products and systems of which we can Engineer to fit your application. Give us a call at 801-977-0508!
SKU ROOFMATE Category
Industrial Reactor Protected by PC-517 Poly-Chemcure Glass Filled Epoxy Mastic Coating
Industrial water treatment plant with PC-517 Poly-Chemcure Glass Filled Epoxy Mastic Coating
Large industrial storage tank getting coated with PC-517 Glass Filled Epoxy Mastic Coating
SKU ROOFMATE Category

ROOFMATE The Roof Preservation System

FAQs ABout Our PC-517 Poly-Chemcure Coating

PC-517 Poly-Chemcure Coating is designed for a variety of surfaces, including steel, concrete, and other industrial substrates. It is particularly effective for protecting steel tanks, pipelines, and structural components exposed to corrosive environments. The coating adheres well to properly prepared surfaces, ensuring optimal performance and durability.

The recommended application process for PC-517 Poly-Chemcure Coating involves thorough surface preparation to remove contaminants like rust, grease, or old coatings, typically through abrasive blasting for optimal adhesion. Once the surface is clean and dry, the coating components should be mixed according to the manufacturer’s instructions until a uniform consistency is achieved. The coating can be applied using a brush, roller, or spray equipment, depending on the project requirements and surface type. Multiple coats may be necessary for enhanced protection, with proper curing time allowed between layers to ensure durability and performance.

PC-517 offers exceptional resistance to a wide range of chemicals, including acids, alkalis, and solvents. It is also highly resistant to abrasions, making it suitable for areas subject to mechanical wear. Its robust formulation protects against environmental factors such as UV radiation, moisture, and temperature fluctuations, ensuring long-lasting performance in harsh conditions.

The typical curing time for PC-517 varies depending on temperature, humidity, and coating thickness. Under standard conditions (approximately 25°C/77°F and low humidity), the coating may cure within 24–48 hours. Full curing for maximum chemical and abrasion resistance usually takes 7–10 days. Factors like lower temperatures, higher humidity, or inadequate ventilation can extend curing time.

Yes, PC-517 is engineered to perform well in high-temperature environments and extreme conditions. Its heat-resistant formulation ensures stability and adhesion in temperatures up to its specified limits. Additionally, it withstands harsh industrial settings, including exposure to aggressive chemicals, mechanical impacts, and fluctuating environmental conditions, making it a reliable choice for demanding applications.

Request a Custom Quote for Your Project