Bowers Industrial

Fluorodyn Caulk made with Viton

Industrial Reactor Protected by PC-517 Poly-Chemcure Glass Filled Epoxy Mastic Coating
Industrial water treatment plant with PC-517 Poly-Chemcure Glass Filled Epoxy Mastic Coating
Large industrial storage tank getting coated with PC-517 Glass Filled Epoxy Mastic Coating

Fluorodyn Caulk made with Viton

THERMODYN CORPORATION introduces the ideal solution for splicing fluoroelastomer parts and for use as a coating to prevent corrosion in virtually all environments. This revolutionary chemical resistant caulk, based on Viton fluoroelastomer and produced in conjunction with DuPont Dow Elastomers, provides excellent sealing for flanges or lining in pipe. Fluorodyn Caulk made with Viton is compounded with 75% solids making it an easy to apply, single component caulk. This advanced compound system provides excellent corrosion resistance in the uncured state, as well as increased resistance after curing, to virtually all chemicals, including nitric, sulfuric and hydrochloric acids. Fluorodyn Caulk made with Viton is recommended for use in harsh, corrosive environments that require flexibility, leak-proof sealing, and high resistance to permeation. Fluorodyn Caulk is available only from Thermodyn in the following sizes: 2.5 oz. (71 ml) tube, pint (320 ml), quart (850 ml) caulking tubes with resealable applicator, gallon (3.8 L), 5 gallon (19 L), and economical 55 gallon (208 L) drum.
We have other products and systems of which we can Engineer to fit your application. Give us a call at 801-977-0508!
SKU Fluorodyn Category
Industrial Reactor Protected by PC-517 Poly-Chemcure Glass Filled Epoxy Mastic Coating
Industrial water treatment plant with PC-517 Poly-Chemcure Glass Filled Epoxy Mastic Coating
Large industrial storage tank getting coated with PC-517 Glass Filled Epoxy Mastic Coating
SKU Fluorodyn Category

Fluorodyn Caulk made with Viton

FAQs About Our

PC-517 Poly-Chemcure Coating is designed for a variety of surfaces, including steel, concrete, and other industrial substrates. It is particularly effective for protecting steel tanks, pipelines, and structural components exposed to corrosive environments. The coating adheres well to properly prepared surfaces, ensuring optimal performance and durability.
The recommended application process for PC-517 Poly-Chemcure Coating involves thorough surface preparation to remove contaminants like rust, grease, or old coatings, typically through abrasive blasting for optimal adhesion. Once the surface is clean and dry, the coating components should be mixed according to the manufacturer’s instructions until a uniform consistency is achieved. The coating can be applied using a brush, roller, or spray equipment, depending on the project requirements and surface type. Multiple coats may be necessary for enhanced protection, with proper curing time allowed between layers to ensure durability and performance.
PC-517 offers exceptional resistance to a wide range of chemicals, including acids, alkalis, and solvents. It is also highly resistant to abrasions, making it suitable for areas subject to mechanical wear. Its robust formulation protects against environmental factors such as UV radiation, moisture, and temperature fluctuations, ensuring long-lasting performance in harsh conditions.
The typical curing time for PC-517 varies depending on temperature, humidity, and coating thickness. Under standard conditions (approximately 25°C/77°F and low humidity), the coating may cure within 24–48 hours. Full curing for maximum chemical and abrasion resistance usually takes 7–10 days. Factors like lower temperatures, higher humidity, or inadequate ventilation can extend curing time.
Yes, PC-517 is engineered to perform well in high-temperature environments and extreme conditions. Its heat-resistant formulation ensures stability and adhesion in temperatures up to its specified limits. Additionally, it withstands harsh industrial settings, including exposure to aggressive chemicals, mechanical impacts, and fluctuating environmental conditions, making it a reliable choice for demanding applications.

Request a Custom Quote for Your Project