What Surfaces And Materials Can PC-517 Poly-Chemcure Coating Be Applied To?

PC-517 Poly-Chemcure Coating is designed for a variety of surfaces, including steel, concrete, and other industrial substrates. It is particularly effective for protecting steel tanks, pipelines, and structural components exposed to corrosive environments. The coating adheres well to properly prepared surfaces, ensuring optimal performance and durability.

What Is The Recommended Application Process For PC-517 Poly-Chemcure Coating?

The recommended application process for PC-517 Poly-Chemcure Coating involves thorough surface preparation to remove contaminants like rust, grease, or old coatings, typically through abrasive blasting for optimal adhesion. Once the surface is clean and dry, the coating components should be mixed according to the manufacturer’s instructions until a uniform consistency is achieved. The coating can be applied using a brush, roller, or spray equipment, depending on the project requirements and surface type. Multiple coats may be necessary for enhanced protection, with proper curing time allowed between layers to ensure durability and performance.

How Resistant Is PC-517 To Chemicals, Abrasions, And Environmental Factors?

PC-517 offers exceptional resistance to a wide range of chemicals, including acids, alkalis, and solvents. It is also highly resistant to abrasions, making it suitable for areas subject to mechanical wear. Its robust formulation protects against environmental factors such as UV radiation, moisture, and temperature fluctuations, ensuring long-lasting performance in harsh conditions.

How Long Does PC-517 Take To Cure, And What Factors Can Affect Curing Time?

The typical curing time for PC-517 varies depending on temperature, humidity, and coating thickness. Under standard conditions (approximately 25°C/77°F and low humidity), the coating may cure within 24–48 hours. Full curing for maximum chemical and abrasion resistance usually takes 7–10 days. Factors like lower temperatures, higher humidity, or inadequate ventilation can extend curing time.

Is PC-517 Suitable For Use In High-Temperature Environments Or Extreme Conditions?

Yes, PC-517 is engineered to perform well in high-temperature environments and extreme conditions. Its heat-resistant formulation ensures stability and adhesion in temperatures up to its specified limits. Additionally, it withstands harsh industrial settings, including exposure to aggressive chemicals, mechanical impacts, and fluctuating environmental conditions, making it a reliable choice for demanding applications.

A400 Geopolymer Concrete

General Description EPOXY PRIMER is a clear, single-component epoxy industrial concrete sealer and primer. It incorporates state of the art water-based technology to produce an extremely versatile product that penetrates and seals porous substrates. It is effective at increasing the bond of acrylic, polyurethane, butyl, and epoxy topcoats to a variety of surfaces. It will also help to “solidify” punky or chalky surfaces. EPOXY PRIMER is safe to use, has very little odor, and is easy to clean up. EPOXY PRIMER is manufactured in standard Clear. Black is also available when EPOXY PRIMER is applied beneath polyurethane foam. The black surface will absorb the sun’s radiant heat, enhancing the ability of the polyurethane foam to achieve its maximum yield. EPOXY PRIMER may be reduced with water for increased penetration over dense substrates We have other products and systems of which we can Engineer to fit your application. Give us a call at 801-977-0508!