1110 High Performance Lining

General Description
DUROMAR HPL-1110 is a flexible, low viscosity, easy to use industrial pipe coating system used on structural steel, tank exteriors or other areas where extra corrosion resistance is required. It is shipped DOT non-corrosive.

Chemical Description
Multi-functional epoxy with a uniquely modified alkyl-amine.

We have other products and systems of which we can Engineer to fit your application. Give us a call at 801-977-0508!

Visual AppearanceHigh Gloss
Solids by Weight100 percentage
pH Range2.5 – 14
Inorganic AcidsGood
Organic AcidsGood
Max. Dry Operating Temperature275 F
Functional Cure60 hours
Full Cure120 hours
Repair SystemEAC
Surface PrepSSPC-6
Pot Life at 70 F45 min.
EquipmentBrush, Roller, Airless Spray
Number of Coats2 – 3
Theoretical Coverage Per Gallon40 mil. sq. ft.
Film Thickness Per Coat10 mils min.
25 mils max.
Maximum DFT75 mils
Recoat Time at 70 F8 – 120 hours
Min. Application Temperature40 F
Mixing Ratio by Weight2.7:1 (B/A)
Mixing Ratio by Volume2:1 (B/A)
Dry to Touch10 hours
Force Curing
Force cures can be used to accelerate the cure or to enhance both physical and chemical properties. Force curing should not start until material has firmly set. Contact DUROMAR for specific instructions.
StorageThis product has a minimum shelf life of one year when stored in a dry area at 50 F – 100 F in the original sealed container.
Handling and Safety
Warning Eye and skin irritant. May cause dermatitis and sensitization.

Always read and understand the product MSDS.

Avoid contact with eyes, skin or clothing. Avoid breathing vapor, mist or spray. Use with good ventilation.

First Aid
In case of contact:
Eyes: Immediately flush with water for at least 15 minutes.
Skin: Immediately remove from skin with dry cloth followed by thorough washing with soap and water.
Inhalation: Remove to fresh air. If breathing is difficult, give oxygen.
Ingestion: Give large quantity of milk or water, induce vomiting. Contact a physician immediately.

Request More Information